What The 10 Most Worst Fiat Panda Key Fob Replacement FAILURES Of All Time Could Have Been Prevented
Reasons Your Fiat 500 Key Fob Won't Work
A key fob with the fiat 500 number is a handy way to unlock the doors and get started the car. There are a myriad of reasons the key fob might stop working. It could be due to a dead battery, damage to the receiver module, water issues, and interference.
This listing is for an NEW replacement Fiat Flip Key Remote - an exact replica of the Ilco brand that needs to be professionally programmed by a local automotive locksmith (click here for Locksmith Search). This remote includes lock, unlock and trunk buttons.
Dead Coin Battery
The most common reason your 500 key fob won't function is due to an inactive battery. Modern key fobs come with a restricted operating range, and should be within only a few feet from the car to operate. If you are further away from your vehicle, and you hit the keyfob, it won't respond and display the message "Key Fob Not Detected".
If this happens, replace the coin cell battery (Part number CR2032) with a new one from a reputable manufacturer like Panasonic, Duracell, or Energizer. They are typically available in your local hardware store, or online.
You can test the battery in the coin-cell by pressing the buttons while standing near your Fiat 500. The parking lights should light up and the key fob will operate the lock and unlock switch.
If your fob's key does not work after replacing the battery, it may be water damage which hinders it from interacting with the module in your vehicle. Water damage can happen in a number of ways, ranging from a light splash to submerging your fob in salt water at the beach. If you suspect that your fob was exposed to water, put it in a dry rice bag to draw the moisture out. If this doesn't work, your fob may need to be reprogrammed by an experienced locksmith or dealer.
Water Damage
Water damage can occur if you immerse the fob in the ocean or wash it in a washing machine. Saltwater can cause the circuit board to become shorted and eventually fail. It's not good to let the fob get wet however, don't give it up even if you accidentally drop the fob in water or forget to take it out of your pocket.
First take replacement key for fiat 500 off the fob. Before replacing the battery clean the electronic chip using isopropyl, or a similar product. Then, test the fob to test if it works. If the key does not function then it might need to be reprogrammed. This is usually handled by an auto locksmith or dealer.
If the key is more recent and was not programmed to your car It will most likely need to be replaced completely. This is a simple procedure that can be handled by a professional automotive locksmith. The locksmith will have to cut the key to match the ignition in your vehicle. They will also need to reprogram the fob in your car's system. This is a cheap and quick process that could be completed in the same day.
Receiver Module Issues
Your 500 key fob might be inoperable because it's out of range. The remote has a maximum range of 30 feet, which means if you are too far from your vehicle it won't be able to respond to your commands. This can be fixed by moving closer to your vehicle until it begins responding.
If you've replaced the battery on your coin (commonly known as"button" or "button" or "watch") and the fob won't work It could be because of an internal circuit board issue. In the majority of cases, reprogramming your fob will resolve this issue. You can find the instructions for the majority of vehicles on YouTube or in the owner's guide.
It could be necessary to replace the clips made of metal that hold the coin batteries in the correct position. If they become loose, it can stop your coin battery from sitting properly and cause your remote to malfunction.
In rare cases the fob could be out of sync with your vehicle because due to hardware or software issues. This issue can be fixed by visiting your local dealer or auto-locksmith to reprogram your key fob. In certain instances the software might need to be reinstalled in your body control modules.
Interference
In addition to a dead coin battery The key fob may not be able to transmit or receive signals due to interference. This is possible when the key fob is near a radio transmitter (cell phones or radar detectors) or any other source of electromagnetic radiation. Other reasons why the key fob may not function include a poor connection to the buttons or the internal chip, or water damage.
If your key fob suddenly stopped working, or if you've tried everything at home to solve the issue (e.g. replacing batteries, reprogramming or using the spare key fob, you might have a faulty receiver module on your 500. The receiver module is located under the dash, and it picks up the radio frequency signals from the key fob. It converts the signals into electronic commands which are then translated by the vehicle.
Luckily, there is an easy method to reset all of the onboard systems in your 500 and include the key fob. Disconnect the battery of 12 volts for about 15 minutes, by removing the negative cable and then the positive cable. Then reconnect the battery. This will clear out any remaining electricity and then restart the car's computers, which could help get your key fob working again. If the problem persists you should seek out an expert technician. They'll be able identify the root cause of your problem.
